# Error importing into Rsection

**URL:** <https://community.dlubal.com/t/error-en-importar-en-rsection/5720>\
**Category:** Product Support\
**Tags:** rsection-1, import-export\
**Created:** [November 17, 2026, 2:38pm UTC](https://community.dlubal.com/t/error-en-importar-en-rsection/5720 "2026-11-17T14:38:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Diegocp](https://community.dlubal.com/letter_avatar_proxy/v4/letter/d/3bc359/32.png) [@Diegocp](https://community.dlubal.com/u/Diegocp)\
**Post date:** [November 17, 2026, 2:38pm UTC](https://community.dlubal.com/t/error-en-importar-en-rsection/5720/1 "2026-11-17T14:38:52Z")

</div>

Hi, I’m importing an omega-shaped DXF. I use the “Create elements automatically” option and enter the thickness. At some point, an error appears that I can’t read—something blocks the reading. Then it continues and creates points, lines, elements, and parts, but nothing is visible.

---

<div class="post-metadata">

**Author:** ![hedi.boukraa](https://community.dlubal.com/user_avatar/community.dlubal.com/hedi.boukraa/32/99_2.png) [@hedi.boukraa](https://community.dlubal.com/u/hedi.boukraa)\
**Post date:** [November 18, 2026, 9:34am UTC](https://community.dlubal.com/t/error-en-importar-en-rsection/5720/3 "2026-11-18T09:34:46Z")

</div>

Hello @Diegocp and welcome to Dlubal Community 👋,

Here are few things you can check:

**1. Length units of the DXF**  
When elements, parts and points are created but nothing shows up, the cross-section is often just at the wrong scale. For example, a drawing in mm gets read as m, so the section ends up huge or tiny. In the import dialog, you can pick the unit in the list **“Length units of DXF template”** so it doesn’t come from the DXF file. After importing, also try **“Show all”** (zoom to fit) to check whether the section is just outside the view.

**2. “Max. thickness” with automatic element creation**  
With **“Create elements automatically”** , the value you enter isn’t the wall thickness. It’s the **maximum thickness**. RSECTION looks for center lines between parallel contour lines and creates elements only where the distance is within this value. Set it a bit larger than the thickest wall of your omega section.

(If your DXF has **center lines** rather than contours, use **“Lines as element center lines”** and enter the real thickness in “t”.)

**3. Two-step alternative**  
You can also import the DXF as a **template** first (lines only) and check the geometry. Then create the elements afterwards with **Edit → Manipulation → Create elements automatically**.

If it still doesn’t work, could you send us the DXF file and a screenshot of the error message? Then we can check it directly.

More information:

- Manual – DXF import in RSECTION: [https://www.dlubal.com/en/downloads-and-information/documents/online-manuals/rsection-1/003845](https://www.dlubal.com/en/downloads-and-information/documents/online-manuals/rsection-1/003845)
- Video – Creating RSECTION Cross-Section from DXF File: [https://www.dlubal.com/en/support-and-learning/learning/videos/004103](https://www.dlubal.com/en/support-and-learning/learning/videos/004103)

Best regards  
Hedi
