# Modeling of cold-bent glass panes

**URL:** <https://community.dlubal.com/t/modellierung-kaltgebogener-glasscheiben/2787>\
**Category:** Product Support\
**Tags:** rfem-6, modeling, glass-structure\
**Created:** [February 4, 2026, 10:44am UTC](https://community.dlubal.com/t/modellierung-kaltgebogener-glasscheiben/2787 "2026-02-04T10:44:08Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fabian\_Allgayer](https://community.dlubal.com/letter_avatar_proxy/v4/letter/f/3ec8ea/32.png) [@Fabian\_Allgayer](https://community.dlubal.com/u/Fabian_Allgayer)\
**Post date:** [February 4, 2026, 10:44am UTC](https://community.dlubal.com/t/modellierung-kaltgebogener-glasscheiben/2787/1 "2026-02-04T10:44:08Z")

</div>

Hello community,

I want to represent a **cold-bent glass pane** as a pane model in RFEM 6. However, my first approach using line support forced displacement leads to singularities.

The goal is to later apply surface loads (e.g., wind) to the already deformed system. In the long term, this should result in a cold-bent insulating glass unit considering the climatic loads through the gas volume.

Does anyone have experience or tips on how to best model such panes?

Thank you very much!

---

<div class="post-metadata">

**Author:** ![fabian.felber](https://community.dlubal.com/user_avatar/community.dlubal.com/fabian.felber/32/95_2.png) [@fabian.felber](https://community.dlubal.com/u/fabian.felber)\
**Post date:** [February 5, 2026, 8:32am UTC](https://community.dlubal.com/t/modellierung-kaltgebogener-glasscheiben/2787/3 "2026-02-05T08:32:01Z")

</div>

Hello @Fabian_Allgayer 👋,

For this scenario, I would recommend an **imperfection of the type "static deformation"**. Here, you create the desired deformation in a separate **load case** through **loads** and can then apply it (optionally scaled) as a **pre-deformation** to the system.

The **FE mesh** deformed in this way is then used as the basis for all **load combinations** to which the corresponding **imperfection** is assigned.

You can find more details in the following **documentation** :  
**[RFEM 6 - Imperfection static deformation](https://www.dlubal.com/de/downloads-und-infos/dokumente/online-handbuecher/rfem-6/000243#h-7)**

If you have any further questions or need support, I am happy to help! 😊

Best regards,  
Fabian

---

<div class="post-metadata">

**Author:** ![Fabian\_Allgayer](https://community.dlubal.com/letter_avatar_proxy/v4/letter/f/3ec8ea/32.png) [@Fabian\_Allgayer](https://community.dlubal.com/u/Fabian_Allgayer)\
**Post date:** [February 9, 2026, 11:54am UTC](https://community.dlubal.com/t/modellierung-kaltgebogener-glasscheiben/2787/4 "2026-02-09T11:54:26Z")

</div>

Hello @fabian.felber,  
Thank you for your suggestion.

Are stresses generated by an imperfection (static deformation) due to the imperfection? In my case, only the deformations are shown in this load case, but no residual stresses generated by the pre-deformation. This also corresponds with my previous knowledge of other imperfections, as these are generally considered stress-free. Or am I mistaken here?

For my calculation, I need the residual stresses from a cold deformation. These stresses and deformations should then be superimposed with the "normal" loads afterwards. However, the loads should be applied to the already deformed system.  
Do you have any tips or advice for me?  
Thank you very much.

---

<div class="post-metadata">

**Author:** ![ulrich.lex](https://community.dlubal.com/user_avatar/community.dlubal.com/ulrich.lex/32/221_2.png) [@ulrich.lex](https://community.dlubal.com/u/ulrich.lex)\
**Post date:** [February 12, 2026, 8:04am UTC](https://community.dlubal.com/t/modellierung-kaltgebogener-glasscheiben/2787/5 "2026-02-12T08:04:07Z")

</div>

Hello @Fabian_Allgayer,

to consider the stresses/deformations of different states, our [Construction Stages Add-On](https://www.dlubal.com/de/produkte/fem-statik-software-rfem/add-ons-fuer-rfem-6/zusaetzliche-analyse/analyse-von-bauzustaenden) is recommended.

Here you can create imposed states and use them for subsequent loads, etc.

In the specific case, in the first step, the "bending" could be generated by load by supporting the surface with springs.

In the following state, the surface support can be replaced by lateral support to achieve the installation state.

In the last step, the additional loads are then applied.

[Glas-kaltgebogen\_01.rf6](https://community.dlubal.com/uploads/short-url/hnMRiLYJFWOpjkrfDkVWE5GOLPC.rf6) (10.9 MB)

I have attached a small example to show how I imagine the modeling.

Best regards